In Stock
Inspected & Documented
Condition notes recorded before palletizing.
30-Day Startup Warranty
Covers block, heads and internal moving components.
In Stock & Ready to Freight
Suspension
RideTech 11337199 63-72 C10 Rear StrongArms System
€1,781.01
+ freight from €89.00, insured road freight, priced by delivery region
(rates)
From €1,870.01 delivered
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This RideTech StrongArm system replaces the OEM leaf springs on a 63-72 C10 entirely, dropping the rear up to 10 inches once paired with RideTech ShockWaves, through an adjustable panhard bar and new trailing arms rather than leaf-spring geometry. Shocks or coil-overs are not included; this kit supplies the arms, brackets, and C-notches that the shocks then bolt to.
What to check before buying
The system needs a one-piece driveshaft, so a two-piece setup has to be swapped first, and wood-bed trucks need an additional shim kit for proper fit. C-notches ship with the kit and are sized to fit the frame rail directly.
What comes with it
New trailing arms with R-joints at the front attachment are included, which matters if your original arms have rusted out, along with a relocated, adjustable panhard bar, also on R-joints, positioned to keep the axle centered and lower the roll center at the new ride height. The front trailing arm crossmember is routed to let the exhaust pass through it rather than under it, adding ground clearance.
Are shocks included? No, this kit is designed to pair with ShockWaves or coil-overs, sold separately.
Does it work with a wood bed? Yes, with an added shim kit for proper fit.
Specifications
KEY SPECS | |
|---|---|
| MFG. Part # | 11337199 |
| Brand | RideTech |
| Suspension Height Adjustment | Lowered |
| Shocks Included | No |
| Bolt-On | Yes |
| Hardware Included | Yes |
| Air Springs Included | No |
| Frame Brackets Included | Yes |
| Welding Required | No |
GENERAL | |
| Sold in Quantity | Kit |
| Notes | Lowers vehicle up to 10 inches |
Suspension Setup & Installation Checklist
- Inspect top mounts, damper seals, bushings, and ball joints prior to fitment.
- Set initial spring preload, collar heights, and damper rebound clicks symmetrically left to right.
- Torque all suspension control arm pivot bolts while the vehicle is at resting ride height (loaded suspension).
- Perform a complete 4-wheel laser alignment once ride height has settled to ensure optimal handling and tire wear.
Full terms: 30-day warranty · returns
