In Stock
Inspected & Documented
Condition notes recorded before palletizing.
2-Year Warranty
Covers block, heads and internal moving components.
In Stock & Ready to Freight
Power Equipment
Hydraulic Hammer Breaker for Mini Compact Excavator
£725.54
incl. 20% VAT (United Kingdom) · change country
United Kingdom · Ireland · Germany · France · Netherlands · Belgium · Spain · Italy · Portugal · Austria · Czech Republic · Poland · Sweden · Denmark · Finland · Greece · Hungary · Romania · Slovakia · Switzerland · Norway
+ freight from £92.92, insured road freight, priced by delivery region
(rates)
From £818.46 delivered
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This hydraulic hammer breaker is a new attachment for mini and compact excavators, rated for a working pressure of 8 to 10 MPa and a flow rate of 2.6 to 7.9 GPM. Blow rate runs 500 to 1200 beats per minute, matched to a 1.38-inch chisel diameter.
What it is for
Breakers like this are built for demolition, trenching, and rock or concrete work that a standard bucket cannot handle, running off the excavator's existing hydraulic circuit rather than a separate power source. A 1/2-inch hose diameter sets the fitting size needed for your machine's auxiliary hydraulic lines.
What to check before buying
- Hydraulic flow: confirm your excavator's auxiliary circuit falls within the 2.6 to 7.9 GPM working range before ordering.
- Hose fitting: this unit uses a 1/2-inch hose diameter; check your machine's existing couplers against this size.
- Weight and shipping: the breaker ships at 206 pounds gross weight in a 29 by 16 by 21-inch package.
Safety note
A California Proposition 65 notice applies to equipment like this, covering exposure to engine exhaust, lead, and mineral oils; follow standard precautions when working around hydraulic attachments and the host machine's engine.
Specifications for this breaker are based on engineering calculations rather than measurements taken on every unit, so treat the figures above as representative rather than exact for your specific serial number. power equipment
Specifications
| Working Pressure | 8-10 MPa |
| Working Flow Rate | 2.6-7.9 GPM |
| Rate | 500-1200bpm |
| Hose Diameter | 1/2 in |
| Chisel Diameter | 1.38 in |
| Gross Weight | 206 lbs |
| Packing Size | 29 x 16 x 21 in |
Equipment Commissioning & Pre-Start Checklist
- Check engine oil, hydraulic fluid, and coolant levels to manufacturer-specified dipstick/sight-glass marks.
- Inspect fuel shut-off valve, air filter element, and hydraulic hose fittings for secure connections.
- Verify all safety pins, locks, hydraulic couplers, and guards are secured before starting.
- Allow a 3–5 minute warm-up period at low idle to circulate lubricants and hydraulic oil prior to applying load.
Full terms: 30-day warranty · returns
