In Stock
Honda 9.9HP High Thrust Portable Outboard | BFP10D3XRT
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Remote mechanical steering on a 25-inch extra-long shaft sets the BFP10D3XRT apart within Honda's 9.9 hp High Thrust line, with both electric and manual starting built in, aimed at boats with console-mounted controls rather than a tiller handle.
Console-steered and extra-long for a reason
The extra-long shaft is meant for boats with taller transoms, often the same hulls that are rigged with remote steering at a console instead of a tiller arm at the back. Before ordering, confirm that your existing control box, cables, and throttle linkage suit this engine's remote-steer connection, since that is the most frequent install snag reported with console-steer outboards bought apart from the boat.
What you get
At 129 pounds, the engine runs a carbureted, 222cc, two-cylinder four-stroke design, with a full-throttle ceiling of 5000-6000 rpm, driving the High Thrust propeller and gearcase built for pushing heavier loads rather than top speed. In the package you'll find the owner's manual, power tilt, a charging system, the High Thrust propeller, and an external 3-gallon tank with its fuel line, alongside Honda's 5-year warranty.
Can I steer this one by hand at the engine? No, it is remote mechanical steering, not tiller control. Does it include power tilt? Yes, power tilt is standard on this unit. Will any console control box work with it? Match the cable and control-head type to this engine's connection before buying, since not every remote-steer box is wired the same way.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns