In Stock
Honda 250HP | BF250DXRA WT
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The BF250DXRA WT combines a 25-inch shaft with 250 horsepower of four-stroke V6 output. Honda's scale puts this unit at 617 lbs. A steering cable connects this unit to the console, with no tiller handle fitted. This unit carries a white cowling, which comes down to preference rather than performance. Gearing here turns the usual direction rather than counter-rotating, which matters only if you're planning a twin-engine install down the line. 3583cc across six cylinders, with EFI fuel injection, sums up this powerhead.
Check before ordering
Take a transom measurement before you order, and compare it against this 25-inch shaft rather than assuming by horsepower class alone. Honda's spec puts full throttle at 5300-6300 rpm here. Repowering is the typical reason buyers land on this horsepower, matching what the hull is already rated for.
Package contents
Beyond the Grand Prix White cowling, standard equipment covers charging for the battery bank and a cooling-flush point, with trim and tilt; closing with the manual and Honda's 5-year warranty promise. This engine excludes a propeller; add that separately.
Should I worry about rotation on a single engine? No, rotation direction only becomes a consideration once a second engine joins the installation.
Is the propeller included with this motor? No, purchase one separately.
Does this engine use fuel injection? Yes, EFI electronic fuel injection rather than a carburetor.
Is starting electric only? Yes, there's no manual pull-start backup at this horsepower.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns