In Stock & Ready to Freight Outboard Motors

Honda 225HP iST | BF225DUCDA WT

Brand: Honda
Condition: New
€32,258.47
Freight included, insured road freight within the UK & Europe (rates)
€32,258.47 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This four-stroke V6, the BF225DUCDA WT, is rated at 225 horsepower and sized with a 30-inch shaft. This engine tips the scale at 628 lbs. Honda's iST system handles shift and throttle electronically here, not through a cable. On its own, this engine runs like any other in the range; the mirrored rotation only earns its keep once a standard-rotation partner is mounted on the transom's other side. Displacement comes to 3583cc over six cylinders, with Honda's EFI system supplying fuel.

Rigging and fitment

Check the 30-inch shaft against your transom depth before buying, since picking the wrong one is a common fitment error at this horsepower. This engine tops out at 5000-6000 rpm wide open. This is a popular repower choice for boats whose rating plate already calls for this much horsepower.

What's in the package

Beyond the digital shift-and-throttle hardware, standard on this motor is charging support and a cooling-flush fitting, with power-driven trim and tilt besides; Honda bundles in the manual plus five years of coverage. A matching propeller is purchased on its own.

Is this engine weaker because of the counter-rotating gearcase? No, output is unchanged; only the direction the propeller turns is different.

Is this engine meant to run on its own? It can, though the counter-rotating gearcase is really intended for pairing with a standard-rotation partner.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns