In Stock
Honda 225HP | BF225DXCRA WT
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
At 225 horsepower, the BF225DXCRA WT is a four-stroke V6 specced with a 25-inch shaft. The scale reads 617 lbs for this unit. This unit steers via a mechanical cable to a console, with no tiller option. This unit carries a white cowling, swapped in purely for appearance rather than performance. This gearcase spins the opposite direction from Honda's standard setup, intended to offset the torque pull of a matching standard-rotation engine mounted beside it. At 3583cc across six cylinders, this block runs electronic fuel injection rather than a carburetor.
Before you order
Check this 25-inch figure against your own transom depth first; mounting too high or too low changes propeller performance either way. Full throttle falls between 5000-6000 rpm on this configuration. At this horsepower, buyers are often matching a transom's rated capacity rather than building out a brand-new rig.
What's in the box
Beyond the counter-rotating gearcase, included with this engine are the charging system and a freshwater flush fitting, alongside trim and tilt; finished off by the manual and Honda's five-year coverage. No propeller is bundled with this configuration.
Do I need this exact rotation for my repower? Only if you're pairing it with a standard-rotation partner; for a single engine, rotation direction doesn't matter much.
Does white cowling cost anything in performance? No, it's a finish option only; output and gearing match the standard-color BF225DXCRA.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns