In Stock & Ready to Freight Outboard Motors

Honda 225HP | BF225DXCRA WT

Brand: Honda
Condition: New
€29,745.50
Freight included, insured road freight within the UK & Europe (rates)
€29,745.50 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

At 225 horsepower, the BF225DXCRA WT is a four-stroke V6 specced with a 25-inch shaft. The scale reads 617 lbs for this unit. This unit steers via a mechanical cable to a console, with no tiller option. This unit carries a white cowling, swapped in purely for appearance rather than performance. This gearcase spins the opposite direction from Honda's standard setup, intended to offset the torque pull of a matching standard-rotation engine mounted beside it. At 3583cc across six cylinders, this block runs electronic fuel injection rather than a carburetor.

Before you order

Check this 25-inch figure against your own transom depth first; mounting too high or too low changes propeller performance either way. Full throttle falls between 5000-6000 rpm on this configuration. At this horsepower, buyers are often matching a transom's rated capacity rather than building out a brand-new rig.

What's in the box

Beyond the counter-rotating gearcase, included with this engine are the charging system and a freshwater flush fitting, alongside trim and tilt; finished off by the manual and Honda's five-year coverage. No propeller is bundled with this configuration.

Do I need this exact rotation for my repower? Only if you're pairing it with a standard-rotation partner; for a single engine, rotation direction doesn't matter much.

Does white cowling cost anything in performance? No, it's a finish option only; output and gearing match the standard-color BF225DXCRA.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns