In Stock
Honda 200HP | BF200DXRA WT
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Finish Honda's standard-rotation, 25-inch-shaft 200 hp outboard in white cowlings and you get the BF200DXRA WT, otherwise identical to the standard-color DXRA: the same remote mechanical steering, electric start, 613-pound weight, and 3583cc EFI six-cylinder, full throttle again between 5000 and 6000 rpm.
What actually tells it apart
Cowling color is the only real difference here; the gear case still runs standard rotation rather than the counter-rotating lower unit Honda sells separately, which only matters if you are pairing engines and need an opposite-turning propeller on one side. Measure the 25-inch shaft against your transom before ordering, since it is the longer option Honda builds for this block.
Equipment covered
Besides the white cowling finish, this motor brings a charging system, switch-run trim and tilt, and a freshwater cooling-system flush to the table, plus the owner's manual. No propeller comes with it, so one has to be sourced on its own.
Care to plan for
The white finish will show water spots and exhaust staining sooner than a standard-color cowling, so plan on wiping it down after outings, in addition to the usual freshwater flush through the cooling passages after any saltwater use. With no pull-cord backup on this electric-start motor, a healthy battery and charging system matter for getting it running every time.
Is this the counter-rotation model? No, that is a separate build. Does it include a propeller? No.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns