In Stock
Honda 15HP Portable Outboard | BF15D3SHS
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The BF15D3SHS is Honda's 15 hp tiller outboard on a 15-inch shaft, built around a two-cylinder, 350cc four-stroke that is carbureted and reaches full throttle somewhere between 4500 and 5500 rpm. Starting is electric with a manual pull cord as backup, so a dead battery still leaves a way to get the engine running, and at 109 pounds one person can lift it onto a small transom alone. This is a new unit, carrying Honda's 5-year warranty.
Matching it to a boat
Fifteen inches is the shorter shaft Honda offers in this 15 hp family; measure your transom depth before ordering, since a shaft that's too short or too long for the hull changes where the propeller sits once the boat is moving. Tiller steering keeps the throttle twist grip and gear shift on the motor handle itself, suited to a smaller craft steered by hand at the stern rather than from a wheel up front.
What arrives with it
Honda equips this motor with a propeller already fitted, the charging system for keeping a battery topped up, a 3-gallon tank that mounts outside the cowling with its own feed line, and a lanyard kill switch, alongside the printed manual.
Common questions
Can I still start it if the battery dies? Yes, the pull cord works without any electrics. Does it tilt by hand or by switch? By hand; power tilt is not part of this build.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns