In Stock & Ready to Freight Outboard Motors

Honda 150HP | BF150DLRA WT

Brand: Honda
Condition: New
€21,692.26
Freight included, insured road freight within the UK & Europe (rates)
€21,692.26 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Honda's BF150DLRA WT is the white-cowling version of this 150 hp, 20-inch-shaft, remote-mechanical-steering outboard, mechanically the same engine as the standard-finish model aside from cosmetics.

White cowling notes

WT changes only the color of the cowlings to white; the four-cylinder, 2354cc powerhead, EFI fuel system, electric starting, and 20-inch shaft underneath carry over unchanged from the standard-color model Honda also sells. Measure your transom for that shaft length before placing an order either way, since the white finish has no bearing on fit.

Running range and weight

Full-throttle operation sits between 5000 and 6000 rpm per Honda's published rating, and this motor weighs 472 lbs. Remote mechanical steering means it is controlled through a cable and wheel rather than a handle mounted at the engine, so plan your console layout around a wheel and cable run rather than a tiller arm. None of that changes with the cowling color, only the look at the back of the boat, so pick the finish you prefer without worrying about a performance trade-off.

Common questions

Is a propeller included? No, that is a separate purchase.

What comes standard? Equipment-wise, nothing changes from the standard-color model apart from the cowling color: expect a charging circuit, switch-controlled trim and tilt, a cooling-flush port, the owner's manual, and Honda's 5-year coverage.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns