In Stock
Honda 140HP | BF140AXCRA
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Honda's BF140AXCRA is a new 140 hp four-stroke outboard with a counter-rotating lower unit, remote mechanical steering, and a 25-inch shaft, built for the second engine in a twin-outboard install that needs opposite-turning propellers.
Counter-rotation notes
Counter rotation means the propeller on this engine turns the opposite direction from a standard motor, which matters when it is mounted alongside a standard-rotation partner so the pair tracks straight rather than pulling to one side under power. Pairing it with another counter-rotating unit works against the point of buying it, so check what your other engine turns before placing an order. This model mounts on a 25-inch shaft, so measure your transom against that figure too.
Power and controls
Four cylinders combine for 2354cc of displacement here, fuel comes through EFI, and starting is electric. Honda's full-throttle window on this motor runs between 5000 and 6000 rpm. Steering is remote mechanical, running off a cable and wheel rather than a tiller handle, which fits a console-steered boat better than one driven by hand at the transom. Listed weight is 485 lbs.
What's included
Expect the counter-rotating lower unit itself, a charging system, a fitting for flushing the cooling system with fresh water, and power trim and tilt as standard, along with an owner's manual; Honda does not bundle a propeller with this engine, so source one matched to the rotation. This motor carries a 5-year Honda warranty from the date of sale.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns