In Stock
Honda 105HP Jet | BF150DJRA
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This new Honda BF150DJRA is a jet-drive outboard: a 150-hp, four-cylinder four-stroke engine fitted with a jet lower unit in place of a propeller, rated at 105 hp measured at the pump itself.
Why a jet lower unit
Swapping the propeller and gearcase for a jet pump lets this engine run through shallow or debris-filled water where a conventional lower unit would be at risk, which is part of why the rated output drops to 105 hp at the pump against 150 hp at the engine itself.
Engine and rigging
Displacement is 2354cc, this engine runs up to 6,000 rpm at full throttle, and the package comes in heavier than Honda's non-jet models at 478 lbs, mounted on a 20-inch shaft. Remote mechanical steering and electric start round out the helm side of this rig.
Warranty and inclusions
Honda's 5-year warranty backs this motor, and the jet lower unit, a charging system, a freshwater flush setup, trim and tilt, and an owner's manual are all part of the package.
Where a jet model fits
Running skinny rivers, flats, or rocky shorelines on a regular basis makes the tradeoff in pump-rated output worth it for the protection a sealed jet lower unit offers over an exposed prop.
Does this have a propeller? No, it runs a jet lower unit instead.
What's the shaft length? 20 inches.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns