In Stock
Inspected & Documented
Condition notes recorded before palletizing.
30-Day Startup Warranty
Covers block, heads and internal moving components.
In Stock & Ready to Freight
Outboard Motors
2019 Honda 5 HP BF5DHLHNA Outboard Motor
€752.74
+ freight from €89.00, insured road freight, priced by delivery region
(rates)
From €841.74 delivered
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Honda's 2019 BF5DHLHNA is a 5 HP, single-cylinder, 127cc four-stroke on a long, 20-inch tiller shaft, with an internal 1.5-liter tank that also accepts an external connector. SKU BF5DHLHNA-19.
Fuel setup on this model year
The internal tank holds 1.5 liters and takes a connector for an external supply on longer runs, giving some flexibility beyond a single fixed source. Digital CDI ignition and an OHV, two-valve head run on 87-octane unleaded fuel only, while manual pull-start and manual trim and tilt keep every adjustment at the transom rather than at a switch.
Before you buy
This is the 20-inch long-shaft, tiller-steered listing, so measure the transom before ordering. Saltwater-rated and geared 2.08-to-1 across forward, neutral, and reverse, the lower unit comes fitted with a three-blade aluminum propeller from the factory. Wet-sump lubrication runs FC-W 10W-30 oil, and the alternator is an optional 6-amp add-on rather than a built-in feature.
What's included
Open the box and find the aluminum propeller, a tool kit, and the printed manual, at a listed dry weight of 60.6 pounds, under Honda's factory warranty.
Q: Can this run on an external fuel supply? Yes, the internal tank's connector accepts one, which is handy for longer trips away from the dock without refilling.
Specifications
| MODEL | BF5DHLHNA |
| MODEL YEAR | 2019 |
| SKU | BF5DHLHNA-19 |
| WEIGHT | 60.6 lb |
| MANUFACTURER | Honda |
| COUNTRY OF MANUFACTURE | China |
| HORSEPOWER | 5hp |
| SHAFT LENGTH | 20″ (Long) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | Internal |
| CYLINDER(S) | 1 |
| DISPLACEMENT | 127 cc (7.8 cubic inches) |
| BORE AND STROKE | 60 x 45 mm (2.4 x 1.8 in.) |
| FULL THROTTLE RPM RANGE | 5000-6000 RPM |
| IGNITION SYSTEM | Digital CDI |
| INDUCTION SCAVENGING | OHV |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | Unleaded Gasoline (87 octane) |
| FUEL TANK / FUEL LINE | Internal (1.5 L) with external connector |
| OIL TYPE | FC-W 10W-30 |
| OIL CAPACITY | Please inquire. |
| LUBRICATION | Wet Sump |
| ALTERNATOR | OPTIONAL 6 amp (installation required) |
| COOLING SYSTEM | Water Cooled |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.08:1 |
| GEAR SHIFT | Forward, Neutral, Reverse |
| PROPELLER | 7-7/8″ Dia. x 7-1/2″ Pitch 3-Blade Aluminum |
| INTERNAL BATTERY | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns
