In Stock
2019 Honda 15 HP BF15D3LH Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This 2019 Honda BF15D3LH is a 15 hp portable outboard with tiller steering, manual starting, and a long 20-inch shaft, listed at 118.0 lbs.
Shaft and controls
A 20-inch shaft is the longer of Honda's two shaft choices in this BF15 family, so pair it with a transom built for that length rather than a shorter one. Steering and throttle are both worked at the tiller handle, there is no remote cable to rig, and starting plus trim and tilt are manual, operated by hand rather than a switch at the console.
Engine details
Two cylinders make up this 350cc block, with SOHC valve gear, PGM-IG ignition, and two valves per cylinder; bore and stroke come to 59mm by 64mm. Fuel-wise, this carbureted engine wants 86-octane unleaded gasoline, held in a 3.2-gallon tank outside the cowling and routed in through a quick-connect line. Honda's full-throttle figure sits at 4,500-5,500 rpm, and the gearcase shifts forward, neutral, and reverse on a 2.08:1 ratio, with the block water cooled and rated for saltwater use.
What comes with it
Lubrication runs wet sump, using FC-W 10W-30 oil, and a 6-amp alternator handles charging. A 9¼ x 10-inch, four-blade aluminum propeller is fitted from the factory, there's no internal battery to maintain, and Honda's coverage on this engine runs 5 years.
Specifications
| MODEL | BF15D3LH |
| MODEL YEAR | 2019 |
| SKU | BF15D3LH-19 |
| WEIGHT | 118.0 lb |
| MANUFACTURER | Honda |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 15hp |
| SHAFT LENGTH | 20″ (Long) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 350 cc (21.4 cubic inches) |
| BORE AND STROKE | 59 mm x 64 mm (2.3 x 2.5 inches) |
| FULL THROTTLE RPM RANGE | 4,500-5,500 RPM |
| IGNITION SYSTEM | PGM-IG |
| INDUCTION SCAVENGING | SOHC |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | Unleaded Gasoline (86 octane) |
| FUEL TANK / FUEL LINE | 3.2 Gal. Fuel Tank + Quick Connect Fuel Line |
| OIL TYPE | FC-W 10W-30 |
| OIL CAPACITY | Please inquire. |
| LUBRICATION | Wet Sump |
| ALTERNATOR | 6-Amp (76 watt) |
| COOLING SYSTEM | Water Cooled |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.08:1 |
| GEAR SHIFT | Forward, Neutral, Reverse |
| PROPELLER | 9¼ x 10 in 4-Blade Aluminum |
| INTERNAL BATTERY | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns