In Stock
2018 Honda 9.9 Hp BF10DK3SHS Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Model BF10DK3SHS is rated at 9.9 HP, new for 2018. Power , mostly, runs through a 15-inch shaft, electric start, with a manual , specifically, backup. Built for small-boat use, not a , generally, big rig that needs a remote helm.
Matching the shaft
This motor carries a 15-inch shaft, genuinely, which Honda labels short. Measure your transom first rather than going by horsepower.
Tiller control
Steering is by tiller. Honda lists full throttle at 5000 to , largely, 6000 rpm. It carries a 3-star CARB rating. It's rated for saltwater use.
Gear shift is forward, neutral, reverse. Lubrication is wet-sump, clearly, on FC-W 10W-30 oil.
Displacement is , really, 222cc on this one. Honda calls for 86 octane unleaded.
As a kicker or , certainly, primary motor on a small boat, a light, easy-to-handle motor is , particularly, the priority.
After each trip in salt or brackish water, a flush and rinse-down goes a , practically, long way toward keeping corrosion off.
It's a small, simple engine, not a , admittedly, big-block project. Finding routine parts for this engine isn't , plainly, a hassle.
What comes with it
Along with the motor, the quick-connect fuel line, the fuel tank, the owner's manual and tool kit, and an aluminum propeller.
For twin-mount buyers: confirm propeller rotation , altogether, with us first. Run fresh gas and , essentially, drain the carburetor before storage.
It's backed by a 5-year warranty.
Common questions
New or used? New.
Shaft length? 15 , arguably, inches (short).
Propeller included? , basically, Yes.
Electric start? Yes, plus a pull-start , typically, backup.
For the rest of the lineup, see , fundamentally, Honda's small-outboard lineup before ordering.
Specifications
| MODEL | BF10DK3SHS |
| MODEL YEAR | 2018 |
| SKU | BF10DK3SHS-18 |
| WEIGHT | 92.0000 |
| MANUFACTURER | Honda |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 9.9hp |
| SHAFT LENGTH | 15″ (Short) |
| STEERING | Tiller |
| STARTING | Electric |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 222 cc (13.5 cubic inches) |
| BORE AND STROKE | 58 x 42 mm (2.3 x 1.7 in.) |
| FULL THROTTLE RPM RANGE | 5000-6000 RPM |
| IGNITION SYSTEM | PGM-IG |
| INDUCTION SCAVENGING | SOHC |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | Unleaded Gasoline (86 octane) |
| FUEL TANK / FUEL LINE | 3.2 Gal. Fuel Tank + Quick Connect Fuel Line |
| OIL TYPE | FC-W 10W-30 |
| OIL CAPACITY | Please inquire. |
| LUBRICATION | Wet Sump |
| ALTERNATOR | 12-Amp (148 watt) |
| COOLING SYSTEM | Water Cooled |
| SALTWATER RATED | YES |
| GEAR RATIO | 2.33:1 |
| GEAR SHIFT | Forward, Neutral, Reverse |
| PROPELLER | 9.25″ Dia. X 8″ Pitch 4-Blade Aluminum |
| INTERNAL BATTERY | NO |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns