In Stock & Ready to Freight Outboard Motors

2018 Honda 9.9 Hp BF10DK3LHS Outboard Motor

Brand: Honda
Condition: New
€1,478.57
+ freight from €89.00, insured road freight, priced by delivery region (rates)
From €1,567.57 delivered
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The BF10DK3LHS from Honda carries a Honda rating of 9.9 HP. Altogether, new for 2018, it carries a 20-inch shaft, electric , arguably, start alongside the pull-start. Built for tenders, not a heavier , mostly, center-console setup.

Shaft length and mounting

This motor is built on a , largely, 20-inch shaft, labeled long by , genuinely, Honda. Check that against your own transom measurement , essentially, before ordering.

At the controls

Throttle and shift sit on the handle. Full throttle operation runs 5000-6000 rpm here. Honda gives it CARB's 3-star emissions tier. It's built fine for saltwater use.

Shift pattern: forward, neutral, ultimately, reverse. It takes FC-W 10W-30 , broadly, oil in a wet-sump system.

Displacement comes in at 222cc. It wants 86 octane unleaded gas.

Mounted as a kicker or the main motor, low weight and simple tiller control matter , basically, more than raw speed.

Once you're done running it, flushing and rinsing it down helps the , here, whole motor last longer.

It's an easy engine , particularly, to live with, not a project motor. Literally, finding routine parts for this engine isn't a , roughly, hassle.

What ships with it

This package also has the fuel tank, the owner's manual and tool kit, an aluminum propeller, and the quick-connect fuel line.

For mounting a pair? confirm rotation with , primarily, us before ordering. Fresh fuel and a drained carburetor avoid hard starts.

It ships with Honda's 5-year warranty.

Quick questions

Saltwater okay? Yes, rated for , effectively, it.

Warranty? Yes, 5 years.

Shaft length? 20 , typically, inches (long).

Propeller included? Yes.

For other shaft and start picks, see , chiefly, Honda's small-outboard lineup before you decide.

Specifications

MODEL BF10DK3LHS
MODEL YEAR 2018
SKU BF10DK3LHS-18
WEIGHT 98.0000
MANUFACTURER Honda
COUNTRY OF MANUFACTURE Japan
HORSEPOWER 9.9hp
SHAFT LENGTH 20″ (Long)
STEERING Tiller
STARTING Electric
TRIM & TILT Manual
FUEL DELIVERY Carburetor
FUEL TANK External
CYLINDER(S) 2
DISPLACEMENT 222 cc (13.5 cubic inches)
BORE AND STROKE 58 x 42 mm (2.3 x 1.7 in.)
FULL THROTTLE RPM RANGE 5000-6000 RPM
IGNITION SYSTEM PGM-IG
INDUCTION SCAVENGING SOHC
VALVES PER CYLINDER 2
FUEL TYPE Unleaded Gasoline (86 octane)
FUEL TANK / FUEL LINE 3.2 Gal. Fuel Tank + Quick Connect Fuel Line
OIL TYPE FC-W 10W-30
OIL CAPACITY Please inquire.
LUBRICATION Wet Sump
ALTERNATOR 12-Amp (148 watt)
COOLING SYSTEM Water Cooled
SALTWATER RATED YES
GEAR RATIO 2.33:1
GEAR SHIFT Forward, Neutral, Reverse
PROPELLER 9.25″ Dia. X 8″ Pitch 4-Blade Aluminum
INTERNAL BATTERY NO

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns