In Stock
2018 Honda 5 Hp BF5DHLHNA Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The 2018 model year of the BF5DHLHNA carries the same 127cc single-cylinder block, long 20-inch shaft, and tiller steering seen elsewhere in this family, built with manual pull-start and manual trim and tilt. SKU BF5DHLHNA-18.
What this model year covers
Every adjustment on this one happens by hand at the transom, with no electric or power-assisted controls fitted. Full throttle reaches 5000-6000 rpm, digital CDI handles ignition and the OHV head carries two valves per cylinder, with fuel limited to 87-octane unleaded gasoline through a carburetor into the 1.5-liter tank and its external connector fitting.
What ships in the box
This listing's box goes beyond the motor: a fuel tank with its quick-connect line, a tilt switch, a throttle control unit suited to top or side mounting with universal cables, a trim limiter, engine oil, an anti-theft fitting, cable protection sleeving, an installation guide, the owner's manual, the aluminum propeller, and a manufacturer's warranty card.
Before you buy
Confirm the 20-inch shaft and tiller steering suit the boat. Gear reduction runs 2.08-to-1 through forward, neutral, and reverse on a saltwater-rated lower unit, with a three-blade aluminum propeller included. This unit's listed dry weight is 60.6000 pounds.
Q: Is starting electric on this one? No, it's a manual pull-start motor, same as the rest of this family.
Specifications
| MODEL | BF5DHLHNA |
| MODEL YEAR | 2018 |
| SKU | BF5DHLHNA-18 |
| WEIGHT | 60.6000 |
| MANUFACTURER | Honda |
| COUNTRY OF MANUFACTURE | China |
| HORSEPOWER | 5hp |
| SHAFT LENGTH | 20″ (Long) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | External |
| CYLINDER(S) | 1 |
| DISPLACEMENT | 127 cc (7.8 cubic inches) |
| BORE AND STROKE | 60 x 45 mm (2.4 x 1.8 in.) |
| FULL THROTTLE RPM RANGE | 5000-6000 RPM |
| IGNITION SYSTEM | Digital CDI |
| INDUCTION SCAVENGING | OHV |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | Unleaded Gasoline (87 octane) |
| FUEL TANK / FUEL LINE | Internal (1.5 L) with external connector |
| OIL TYPE | FC-W 10W-30 |
| OIL CAPACITY | Please inquire. |
| LUBRICATION | Wet Sump |
| ALTERNATOR | OPTIONAL 6 amp (installation required) |
| COOLING SYSTEM | Water Cooled |
| SALTWATER RATED | YES |
| GEAR RATIO | 2.08:1 |
| GEAR SHIFT | Forward, Neutral, Reverse |
| PROPELLER | 7-7/8″ Dia. x 7-1/2″ Pitch 3-Blade Aluminum |
| INTERNAL BATTERY | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns