In Stock & Ready to Freight Outboard Motors

2018 Honda 20 Hp BF20D3SHT Outboard Motor

Brand: Honda
Condition: New
€1,932.07
Freight included, insured road freight within the UK & Europe (rates)
€1,932.07 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Honda's 2018 BF20D3SHT pairs electric start with power tilt on a 15-inch short-shaft, tiller-steered 20 hp block, running the same water-cooled, two-cylinder, 350cc PGM-ignition engine used across this family. Fuel comes from a 3.2-gallon tank through a carburetor, burning 86-octane unleaded gasoline, and the full-throttle band runs from 5000 up to 6000 rpm, backed by a 12-amp alternator to handle the electric load.

Before ordering

Electric starting is confirmed for this unit; whether a manual pull-cord backup is also fitted isn't settled, so check with us first if that matters to your plans. The short 15-inch shaft suits a lower transom than the long-shaft 20-inch version of this engine.

Features built into this engine

A pendulum engine mount smooths out vibration, shallow water drive lets the gear case tilt up for thin water, and the wet-sump system holds FC-W 10W-30 oil for long-term durability. Drive runs through a 2.08:1 gear ratio to a four-blade aluminum propeller, shifting forward, neutral, and reverse, and the 12-amp alternator here is rated at 151 watts total.

Common questions

Is it saltwater rated? Yes. Is the fuel tank built in? No, external with its own line. What warranty applies? Five years, on this new motor. Is it water cooled? Yes, with PGM ignition.

Specifications

MODEL BF20D3SHT
MODEL YEAR 2018
SKU BF20D3SHT-18
WEIGHT 130.0000
MANUFACTURER Honda
COUNTRY OF MANUFACTURE Japan
HORSEPOWER 20hp
SHAFT LENGTH 15″ (Short)
STEERING Tiller
STARTING Electric
TRIM & TILT Power Tilt
FUEL DELIVERY Carburetor
FUEL TANK External
CYLINDER(S) 2
DISPLACEMENT 350 cc (21.5 cubic inches)
BORE AND STROKE 59 mm x 64 mm (2.3 x 2.5 inches)
FULL THROTTLE RPM RANGE 5,000-6,000 RPM
IGNITION SYSTEM PGM-IG
INDUCTION SCAVENGING SOHC
VALVES PER CYLINDER 2
FUEL TYPE Unleaded Gasoline (86 octane)
FUEL TANK / FUEL LINE 3.2 Gal. Fuel Tank + Quick Connect Fuel Line
OIL TYPE FC-W 10W-30
OIL CAPACITY Please Inquire.
LUBRICATION Wet Sump
ALTERNATOR 12-Amp (151 watt)
COOLING SYSTEM Water Cooled
SALTWATER RATED Yes
GEAR RATIO 2.08:1
GEAR SHIFT Forward, Neutral, Reverse
PROPELLER 9¼ x 10 in 4-Blade Aluminum
INTERNAL BATTERY NO

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns