In Stock
2018 Honda 15 Hp BF15D3SHT Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Honda's 2018 BF15D3SHT adds power tilt to the electric-start, short-shaft 15 hp line, making it the most equipped tiller-steered version Honda offers at this size.
Power tilt and starting
Power tilt is the step up from manual-tilt models in this same family, useful for raising the motor clear of the water at the push of a switch rather than hand-cranking it, and electric start carries over here alongside the stronger 12-amp alternator used on the equipped versions. Steering stays at the tiller, and the shaft is the short 15-inch length, built for a lower transom.
Engine and running range
This two-cylinder powerhead measures 350cc, its bore and stroke set at 59 and 64 millimeters, with a SOHC head and PGM-IG spark serving two valves on each cylinder. An external tank holding 3.2 gallons feeds the carburetor through a quick-connect fitting, burning 86-octane fuel. Honda's published full-throttle figure is 4,500-5,500 rpm, the final gearing is 2.08:1 across forward, neutral, and reverse, the block takes saltwater duty, and FC-W 10W-30 oil circulates through a wet-sump arrangement.
In the crate
In the box: the owner's manual, a 5-year warranty card, and an anti-theft fitting, together with the tiller handle, a spare four-blade aluminum propeller, a trim limiter, and oil. The external tank arrives with its own quick-connect line, tilt switch, mounting cables, and a Teleflex SL3 throttle control that mounts top or side.
Specifications
| MODEL | BF15D3SHT |
| MODEL YEAR | 2018 |
| SKU | BF15D3SHT-18 |
| WEIGHT | 130.0000 |
| MANUFACTURER | Honda |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 15hp |
| SHAFT LENGTH | 15″ (Short) |
| STEERING | Tiller |
| STARTING | Electric |
| TRIM & TILT | Power Tilt |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 350 cc (21.4 cubic inches) |
| BORE AND STROKE | 59 mm x 64 mm (2.3 x 2.5 inches) |
| FULL THROTTLE RPM RANGE | 4,500-5,500 RPM |
| IGNITION SYSTEM | PGM-IG |
| INDUCTION SCAVENGING | SOHC |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | Unleaded Gasoline (86 octane) |
| FUEL TANK / FUEL LINE | 3.2 Gal. Fuel Tank + Quick Connect Fuel Line |
| OIL TYPE | FC-W 10W-30 |
| OIL CAPACITY | Please inquire. |
| LUBRICATION | Wet Sump |
| ALTERNATOR | 12-Amp (148 watt) |
| COOLING SYSTEM | Water Cooled |
| SALTWATER RATED | YES |
| GEAR RATIO | 2.08:1 |
| GEAR SHIFT | Forward, Neutral, Reverse |
| PROPELLER | 9¼ x 10 in 4-Blade Aluminum |
| INTERNAL BATTERY | NO |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns