In Stock
2018 Honda 15 Hp BF15D3SHS Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Honda's 2018 BF15D3SHS steps up from the base BF15D3SH with electric starting on the same short 15-inch tiller-steered shaft, at a listed 124 lbs.
Starting and electrics
Electric start is the headline difference here, backed by a stronger 12-amp alternator than the manual-only model, which helps if you're also running lights or small electronics off this engine. Trim and tilt remain manual, worked at the tiller handle rather than a switch at a console. This is the same two-cylinder, 350cc powerhead as the base model underneath, running a SOHC head and PGM-IG spark with two valves on each cylinder, bore at 59mm and stroke at 64mm.
Fuel and running range
Fuel comes carbureted, burning 86-octane gasoline pulled from a tank outside the cowling that holds 3.2 gallons, plumbed in on a quick-connect fitting. This engine tops out at 4,500-5,500 rpm per Honda, shifts forward-neutral-reverse at 2.08:1, and its block carries a saltwater rating in addition to fresh water. A four-blade, aluminum propeller measuring 9¼ by 10 inches comes mounted on the gearcase, oil is FC-W 10W-30 run through a wet-sump system, and there is no internal battery.
In the crate
Along with the motor, the crate holds a trim limiter, oil, and an anti-theft fitting, plus the tiller handle, a spare propeller, and mounting cables. The Teleflex SL3 throttle control included here mounts to either the top or the side, and the fuel tank arrives with its tilt switch and quick-connect fitting attached, alongside the owner's manual and a 5-year warranty card.
Specifications
| MODEL | BF15D3SHS |
| MODEL YEAR | 2018 |
| SKU | BF15D3SHS-18 |
| WEIGHT | 124.0000 |
| MANUFACTURER | Honda |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 15hp |
| SHAFT LENGTH | 15″ (Short) |
| STEERING | Tiller |
| STARTING | Electric |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 350 cc (21.4 cubic inches) |
| BORE AND STROKE | 59 mm x 64 mm (2.3 x 2.5 inches) |
| FULL THROTTLE RPM RANGE | 4,500-5,500 RPM |
| IGNITION SYSTEM | PGM-IG |
| INDUCTION SCAVENGING | SOHC |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | Unleaded Gasoline (86 octane) |
| FUEL TANK / FUEL LINE | 3.2 Gal. Fuel Tank + Quick Connect Fuel Line |
| OIL TYPE | FC-W 10W-30 |
| OIL CAPACITY | Please inquire. |
| LUBRICATION | Wet Sump |
| ALTERNATOR | 12-Amp (148 watt) |
| COOLING SYSTEM | Water Cooled |
| SALTWATER RATED | YES |
| GEAR RATIO | 2.08:1 |
| GEAR SHIFT | Forward, Neutral, Reverse |
| PROPELLER | 9¼ x 10 in 4-Blade Aluminum |
| INTERNAL BATTERY | NO |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns