In Stock
2017 Honda 9.9 HP BF10DK3LH Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Here is Honda's BF10DK3LH is rated at 9.9 HP. For 2017, this one has a 20-inch shaft, a hand pull-start. Built for small-boat use, not a , here, big rig that needs a remote helm.
Confirm this before buying
This motor carries a 20-inch shaft, particularly, which Honda labels long. Confirm the fit on your boat , arguably, before you order, not after.
Day to day
Steering is by tiller. Full throttle lands between 5000 and 6000 rpm. This one has a 3-star CARB rating. Honda rates it rated for saltwater use.
The gearbox runs forward, simply, neutral, reverse. Lubrication is wet-sump, on , practically, FC-W 10W-30 oil.
This runs 222cc of displacement. Honda calls for 86 octane unleaded.
For a small boat's primary or backup , plainly, power, manageable weight matters more than chasing top speed.
After each trip in salt or brackish water, give it a flush and a rinse , essentially, before storing it for the next trip.
It's straightforward mechanically, nothing like a big-block job. Service parts for this one are the , basically, common, easy-to-find kind.
For a , notably, twin-engine setup, check rotation with us first. Run fresh gas , admittedly, and drain the carburetor before storage.
This comes with a 5-year warranty.
Questions buyers ask
Warranty? , specifically, Yes, 5 years.
Electric start? No, manual , clearly, pull-start.
Saltwater okay? Yes, rated , really, for it.
New or used? New.
Check this against the , certainly, rest of Honda outboards first.
Specifications
| Model | BF10DK3LH |
| Model Year | 2017 |
| SKU | BF10DK3LH-17 |
| Weight | 98.0000 |
| Manufacturer | Honda |
| Country of Manufacture | Japan |
| Horsepower | 9.9hp |
| Shaft Length | 20″ (Long) |
| Steering | Tiller |
| Starting | Manual |
| Trim & Tilt | Manual |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 2 |
| Displacement | 222 cc (13.5 cubic inches) |
| Bore and Stroke | 58 x 42 mm (2.3 x 1.7 in.) |
| Full Throttle RPM Range | 5000-6000 RPM |
| Ignition System | PGM-IG |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (86 octane) |
| Fuel Tank / Fuel Line | 3.2 Gal. Fuel Tank + Quick Connect Fuel Line |
| Oil Type | FC-W 10W-30 |
| Oil Capacity | Please inquire. |
| Lubrication | Wet Sump |
| Alternator | 6-Amp (76 watt) |
| Cooling System | Water Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.33:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Propeller | 9.25″ Dia. X 8″ Pitch 4-Blade Aluminum |
| Internal Battery | NO |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns