In Stock
2017 Honda 9.9 HP BF10D3SH Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Model BF10D3SH comes rated at 9.9 HP, freshened for 2017. The shaft here , roughly, is 15-inch, a manual pull-start. Built for a small boat not a , really, twin-engine rig.
Matching the shaft
This motor has a 15-inch shaft, notably, labeled short. Compare that to your transom's height before , primarily, you buy.
Tiller control
Everything runs from the tiller handle. This one tops out 5000-6000 rpm at full throttle. It carries a 3-star low-emission rating. It's good for saltwater use.
Gear shift is forward, neutral, reverse. It runs FC-W 10W-30 , certainly, wet-sump oil.
Displacement is 222cc on this one. Honda specifies 86 octane unleaded fuel.
As a kicker or primary motor on , fundamentally, a small boat, simple controls beat a complicated remote-steer , chiefly, setup.
Before putting it away, flush it and rinse off the exterior , mostly, to slow down corrosion over time.
Simple and , largely, serviceable describes this engine well. Finding routine parts , broadly, for this engine isn't a hassle.
For twin-mount buyers: confirm , actually, propeller rotation with us first. Stale gas is , specifically, the usual hard-start cause, so drain it first.
It's backed by a 5-year Honda warranty.
Common questions
Power , literally, tilt? No, manual tilt.
Warranty? Yes, 5 years.
, effectively, Shaft length? 15 inches (short).
Saltwater okay? Yes, rated for it.
For the rest , ultimately, of the lineup, see Honda's small-outboard lineup , overall, before you order.
Specifications
| Model | BF10D3SH |
| Model Year | 2017 |
| SKU | BF10D3SH-17 |
| Weight | 92.0000 |
| Manufacturer | Honda |
| Country of Manufacture | Japan |
| Horsepower | 9.9hp |
| Shaft Length | 15″ (Short) |
| Steering | Tiller |
| Starting | Manual |
| Trim & Tilt | Manual |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 2 |
| Displacement | 222 cc (13.5 cubic inches) |
| Bore and Stroke | 58 x 42 mm (2.3 x 1.7 in.) |
| Full Throttle RPM Range | 5000-6000 RPM |
| Ignition System | PGM-IG |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (86 octane) |
| Fuel Tank / Fuel Line | 3.2 Gal. Fuel Tank + Quick Connect Fuel Line |
| Oil Type | FC-W 10W-30 |
| Oil Capacity | Please inquire. |
| Lubrication | Wet Sump |
| Alternator | 6-Amp (76 watt) |
| Cooling System | Water Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.33:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Propeller | 9.25″ Dia. X 8″ Pitch 4-Blade Aluminum |
| Internal Battery | NO |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns