In Stock
2017 Honda 8 HP BFP8DK3LHT Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The BFP8DK3LHT from Honda is Honda-rated at 8 HP, new for 2017. Power runs through a 20-inch shaft, electric start alongside the pull-start. Built for buyers who want simple, fundamentally, hands-on controls over top speed.
Shaft length and mounting
This motor uses a 20-inch shaft, actually, which Honda calls long. Measure your transom first rather than going , ultimately, by horsepower.
About this gearcase
This Power Thrust gearcase uses a 10-inch, 6.5-inch-pitch propeller sized for the extra thrust, favoring bite under load over speed.
At the controls
You steer this one by tiller. Honda lists full throttle at 4500 to , overall, 5500 rpm. Honda gives it a 3-star emissions rating. It's built cleared for saltwater running.
Shift pattern: forward, neutral, reverse. Oil is FC-W , literally, 10W-30, wet-sump, not a pre-mix.
Displacement comes in at 222cc. Fuel should be 86 octane unleaded.
Mounted as a kicker , largely, or the main motor, a light, easy-to-handle motor is , roughly, the priority.
At the end of an outing, a flush and rinse-down goes a , primarily, long way toward keeping corrosion off.
Nothing complicated , chiefly, here, just a simple, serviceable small engine. Finding routine parts for this engine isn't , broadly, a hassle.
For mounting a pair? confirm rotation , admittedly, with us before ordering. Drain the carburetor and keep fuel fresh , effectively, before storing.
It ships with a 5-year factory warranty.
Quick questions
New or used? New.
, arguably, Shaft length? 20 inches (long).
Warranty? Yes, 5 , genuinely, years.
Electric start? Yes, plus a pull-start , mostly, backup.
For other shaft and start picks, see , essentially, Honda's small-outboard lineup before ordering.
Specifications
| Model | BFP8DK3LHT |
| Model Year | 2017 |
| SKU | BFP8DK3LHT-17 |
| Weight | 114.0000 |
| Manufacturer | Honda |
| Country of Manufacture | Japan |
| Horsepower | 8hp |
| Shaft Length | 20″ (Long) |
| Steering | Tiller |
| Starting | Electric |
| Trim & Tilt | Power Tilt |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 2 |
| Displacement | 222 cc (13.5 cubic inches) |
| Bore and Stroke | 58 x 42 mm (2.3 x 1.7 in.) |
| Full Throttle RPM Range | 4500-5500 RPM |
| Ignition System | PGM-IG |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (86 octane) |
| Fuel Tank / Fuel Line | 3.0 Gal. Fuel Tank + Quick Connect Fuel Line |
| Oil Type | FC-W 10W-30 |
| Oil Capacity | Please inquire. |
| Lubrication | Wet Sump |
| Alternator | 12-Amp (148 watt) |
| Cooling System | Water Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.33:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Propeller | 10″ Dia. X 6.5″ Pitch 4-Blade Aluminum |
| Internal Battery | NO |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns