In Stock
2017 Honda 8 HP BF8DK3SHA Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Here is Honda's BF8DK3SHA carries a Honda rating of 8 HP, freshened for 2017. The shaft , here, here is 15-inch, a hand pull-start. Built for tenders, not a heavier center-console setup.
Confirm this before buying
This motor is built on a 15-inch shaft, labeled short by Honda. Compare that to your transom's height before , particularly, you buy.
Day to day
Throttle and shift sit on the handle. This one has CARB's 3-star emissions tier. Honda rates it fine for saltwater use.
The gearbox runs forward, neutral, reverse. It takes FC-W 10W-30 , essentially, oil in a wet-sump system.
This runs 222cc of displacement. It wants 86 octane unleaded gas.
For a small boat's primary or backup power, simple controls beat a complicated remote-steer , practically, setup.
Once you're done running it, flush it and rinse off the exterior , typically, to slow down corrosion over time.
Simple and , generally, serviceable describes this engine well. Service parts for this one are the , admittedly, common, easy-to-find kind.
For a twin-engine setup, check rotation with us first. Fresh fuel and a drained carburetor , basically, avoid hard starts.
This comes with Honda's 5-year warranty.
Questions buyers ask
Warranty? Yes, 5 years.
Electric start? No, clearly, manual pull-start.
Saltwater okay? Yes, rated for it.
New , arguably, or used? New.
Check this against the rest of Honda outboards before you order.
Specifications
| Model | BF8DK3SHA |
| Model Year | 2017 |
| SKU | BF8DK3SHA-17 |
| Weight | 92.0000 |
| Manufacturer | Honda |
| Country of Manufacture | Japan |
| Horsepower | 8hp |
| Shaft Length | 15″ (Short) |
| Steering | Tiller |
| Starting | Manual |
| Trim & Tilt | Manual |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 2 |
| Displacement | 222 cc (13.5 cubic inches) |
| Bore and Stroke | 58 x 42 mm (2.3 x 1.7 in.) |
| Full Throttle RPM Range | 58 x 42 mm (2.3 x 1.7 in.) |
| Ignition System | PGM-IG |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (86 octane) |
| Fuel Tank / Fuel Line | 3.0 Gal. Fuel Tank + Quick Connect Fuel Line |
| Oil Type | FC-W 10W-30 |
| Oil Capacity | Please inquire. |
| Lubrication | Wet Sump |
| Alternator | 6-Amp (76 watt) |
| Cooling System | Water Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.33:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Propeller | 9.25″ Dia. X 8″ Pitch 4-Blade Aluminum |
| Internal Battery | NO |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns