In Stock
Inspected & Documented
Condition notes recorded before palletizing.
30-Day Startup Warranty
Covers block, heads and internal moving components.
In Stock & Ready to Freight
Outboard Motors
2017 Honda 8 HP BF8DK3LHA Outboard Motor
€866.11
+ freight from €89.00, insured road freight, priced by delivery region
(rates)
From €955.11 delivered
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The BF8DK3LHA from Honda is rated at 8 HP, freshened for 2017. The shaft here is 20-inch, rope-pull starting. Built for small-boat use, not a big rig that needs a remote helm.
Shaft length and mounting
This motor carries a 20-inch shaft, which Honda labels long. Compare that to your transom's height before you buy.
At the controls
Steering is by tiller. This one tops out 4500-5500 rpm at full throttle. Honda gives it a 3-star CARB rating. It's built rated for saltwater use.
Shift pattern: forward, neutral, reverse. Lubrication is wet-sump, on FC-W 10W-30 oil.
Displacement comes in at 222cc. Honda calls for 86 octane unleaded.
Mounted as a kicker or the main motor, simple controls beat a complicated remote-steer setup.
After each trip in salt or brackish water, flush it and rinse off the exterior to slow down corrosion over time.
Simple and serviceable describes this engine well. Finding routine parts for this engine isn't a hassle.
For mounting a pair? confirm rotation with us before ordering. Run fresh gas and drain the carburetor before storage.
It ships with a 5-year warranty.
Quick questions
New or used? New.
Shaft length? 20 inches (long).
Warranty? Yes, 5 years.
Electric start? No, manual pull-start.
For other shaft and start picks, see Honda's small-outboard lineup before you order.
Specifications
| Model | BF8DK3LHA |
| Model Year | 2017 |
| SKU | BF8DK3LHA-17 |
| Weight | 98.0000 |
| Manufacturer | Honda |
| Country of Manufacture | Japan |
| Horsepower | 8hp |
| Shaft Length | 20″ (Long) |
| Steering | Tiller |
| Starting | Manual |
| Trim & Tilt | Manual |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 2 |
| Displacement | 222 cc (13.5 cubic inches) |
| Bore and Stroke | 58 x 42 mm (2.3 x 1.7 in.) |
| Full Throttle RPM Range | 4500-5500 RPM |
| Ignition System | PGM-IG |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (86 octane) |
| Fuel Tank / Fuel Line | 3.0 Gal. Fuel Tank + Quick Connect Fuel Line |
| Oil Type | FC-W 10W-30 |
| Oil Capacity | Please inquire. |
| Lubrication | Wet Sump |
| Alternator | 6-Amp (76 watt) |
| Cooling System | Water Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.33:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Propeller | 9.25″ Dia. X 8″ Pitch 4-Blade Aluminum |
| Internal Battery | NO |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns
