In Stock
2017 Honda 6 HP BF6DHSHNA Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Honda's 2017 BF6DHSHNA is a 6 HP, single-cylinder, 127cc four-stroke with tiller steering and manual starting on a short shaft. SKU BF6DHSHNA-17.
What a short-shaft tiller motor like this suits
Keeping steering and throttle together at the transom works for smaller hulls run by hand rather than from a console, and a short shaft matches a boat with a lower transom height. This one fires through digital CDI with an OHV, two-valve head, the same basic ignition layout Honda uses across its small portables, running on 87-octane unleaded fuel only up to a 5000-6000 rpm ceiling.
Before you buy
This is the short-shaft listing in Honda's lineup at this displacement; measure the transom before ordering rather than assuming a longer shaft would fit the same way. This gearcase is rated for saltwater use, reduces 2.08-to-1 through its forward, neutral, and reverse shift pattern, and spins a three-blade aluminum propeller. The alternator installs as a separate, optional 6-amp unit rather than coming built in.
What's included
A tool kit and owner's manual ship along with the aluminum propeller. Listed weight for this motor is 59.5000 pounds, under Honda's factory warranty.
Q: Is this engine tiller or remote steered? Tiller, with throttle and steering together at the transom.
Q: Is the oil system wet sump? Yes, lubrication here is wet sump using FC-W 10W-30 oil.
Specifications
| Model | BF6DHSHNA |
| Model Year | 2017 |
| SKU | BF6DHSHNA-17 |
| Weight | 59.5000 |
| Manufacturer | Honda |
| Country of Manufacture | China |
| Horsepower | 6hp |
| Shaft Length | 15″ (Short) |
| Steering | Tiller |
| Starting | Manual |
| Trim & Tilt | Manual |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 1 |
| Displacement | 127 cc (7.8 cubic inches) |
| Bore and Stroke | 60 x 45 mm (2.4 x 1.8 in.) |
| Full Throttle RPM Range | 5000-6000 RPM |
| Ignition System | Digital CDI |
| Induction Scavenging | OHV |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (87 octane) |
| Fuel Tank / Fuel Line | Internal (1.5 L) with external connector |
| Oil Type | FC-W 10W-30 |
| Oil Capacity | Please inquire. |
| Lubrication | Wet Sump |
| Alternator | OPTIONAL 6 amp (installation required) |
| Cooling System | Water Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.08:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Propeller | 7-7/8″ Dia. x 7-1/2″ Pitch 3-Blade Aluminum |
| Internal Battery | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns