In Stock
2017 Honda 5 HP BF5DHSHNA Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
A 2017 Honda 5 HP outboard, model BF5DHSHNA, pairing a single-cylinder, 127cc four-stroke with a 15-inch short shaft, manual tiller steering, and manual starting, built for small tenders and similarly light boats.
What's under the cowling
Displacement and cylinder count match Honda's smaller BF4 line at 127cc from one cylinder, with the same overhead-valve head and 2-valve layout, but this BF5 runs a higher 5,000 to 6,000 rpm full-throttle range and a 1.5-liter internal fuel tank that also accepts an external fuel line connection for longer trips. Fuel delivery is by carburetor on 87-octane unleaded gasoline, with wet-sump lubrication using FC-W 10W-30 oil, and the motor is water cooled and saltwater rated.
What to check before buying
Honda's spec sheet lists this unit at 59.5000 lbs, light enough to carry by hand, but confirm your transom suits a 15-inch short shaft before ordering, since a long-shaft version would sit differently on a taller transom. Trim and tilt and the starter are both manual, a 6-amp alternator can be added as an option but is not wired in from the factory, and shifting runs forward-neutral-reverse through a 2.08:1 gear ratio. The motor meets Honda's Ultra Low 3-Star CARB emissions standard and carries a 5-year True Warranty.
Common questions
Can I run an external fuel line? Yes, the internal 1.5-liter tank also accepts an external connector.
How much does it weigh? 59.5000 lbs per Honda's spec sheet.
Specifications
| Model | BF5DHSHNA |
| Model Year | 2017 |
| SKU | BF5DHSHNA-17 |
| Weight | 59.5000 |
| Manufacturer | Honda |
| Country of Manufacture | China |
| Horsepower | 5hp |
| Shaft Length | 15″ (Short) |
| Steering | Tiller |
| Starting | Manual |
| Trim & Tilt | Manual |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 1 |
| Displacement | 127 cc (7.8 cubic inches) |
| Bore and Stroke | 60 x 45 mm (2.4 x 1.8 in.) |
| Full Throttle RPM Range | 5000-6000 RPM |
| Ignition System | Digital CDI |
| Induction Scavenging | OHV |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (87 octane) |
| Fuel Tank / Fuel Line | Internal (1.5 L) with external connector |
| Oil Type | FC-W 10W-30 |
| Oil Capacity | Please inquire. |
| Lubrication | Wet Sump |
| Alternator | OPTIONAL 6 amp (installation required) |
| Cooling System | Water Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.08:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Propeller | 7-7/8″ Dia. x 7-1/2″ Pitch 3-Blade Aluminum |
| Internal Battery | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns