In Stock
2017 Honda 5 HP BF5DHLHNA Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
An earlier model year in the same family, the 2017 BF5DHLHNA is a 127cc, single-cylinder, 20-inch long-shaft tiller motor with manual starting. SKU BF5DHLHNA-17.
What this spec covers
The tank setup holds 1.5 liters internally with an external connector fitting, fuel is limited to 87-octane unleaded gasoline through a carburetor, and digital CDI fires an OHV head carrying two valves per cylinder. Full throttle climbs to 5000-6000 rpm, with trim and tilt both set by hand at the transom.
Measuring up
This is the long-shaft, tiller-steered listing at 20 inches, so measure the transom before ordering rather than assuming it fits a lower-transom boat. A three-blade aluminum propeller comes fitted standard, driven through a saltwater-rated gearcase that shifts 2.08-to-1 across forward, neutral, and reverse. Wet-sump lubrication takes FC-W 10W-30 oil, and the 6-amp alternator installs as a separate, optional upgrade rather than coming built in.
What's included
This earlier listing ships the simpler kit: a tool kit, the owner's manual, and the aluminum propeller round out what's included. Listed dry weight comes in at 60.6000 pounds, backed by Honda's factory warranty.
Q: Is starting electric or manual on this model? Manual, with a pull-start at the tiller.
Q: Does the tank take an external line too? Yes, the 1.5-liter internal tank has a fitting for an external connector.
Specifications
| Model | BF5DHLHNA |
| Model Year | 2017 |
| SKU | BF5DHLHNA-17 |
| Weight | 60.6000 |
| Manufacturer | Honda |
| Country of Manufacture | China |
| Horsepower | 5hp |
| Shaft Length | 20″ (Long) |
| Steering | Tiller |
| Starting | Manual |
| Trim & Tilt | Manual |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 1 |
| Displacement | 127 cc (7.8 cubic inches) |
| Bore and Stroke | 60 x 45 mm (2.4 x 1.8 in.) |
| Full Throttle RPM Range | 5000-6000 RPM |
| Ignition System | Digital CDI |
| Induction Scavenging | OHV |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (87 octane) |
| Fuel Tank / Fuel Line | Internal (1.5 L) with external connector |
| Oil Type | FC-W 10W-30 |
| Oil Capacity | Please inquire. |
| Lubrication | Wet Sump |
| Alternator | OPTIONAL 6 amp (installation required) |
| Cooling System | Water Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.08:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Propeller | 7-7/8″ Dia. x 7-1/2″ Pitch 3-Blade Aluminum |
| Internal Battery | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns