In Stock
2017 Honda 15 HP BF15D3SH Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The 2017 Honda BF15D3SH is a short-shaft, 15 hp portable outboard with tiller steering and manual starting, carrying the same listed weight as the short-shaft electric-start model in this family.
Specifications
Honda's rating for full throttle on this engine is 4,500-5,500 rpm, with the gearcase stepping through forward, neutral, and reverse on a 2.08:1 final ratio. Cooling draws fresh water through a block that Honda rates for saltwater as well, and a 6-amp alternator keeps the battery charged while running. Oil is FC-W 10W-30 in a wet-sump lubrication setup, and propeller size here is 9¼ x 10 inches with four aluminum blades, fitted at the factory; there's no internal battery to service.
Why the 15-inch shaft
Honda offers this 350cc, two-cylinder engine on two different shaft lengths, and this particular listing is the shorter 15-inch one, suited to a lower-transom boat rather than a tall one. Everything is worked by hand here: tiller steering, manual trim and tilt, and a pull-cord starter. Valve operation is SOHC, ignition is PGM-IG, each cylinder carries two valves, and an externally mounted 3.2-gallon tank feeds the carburetor. None of that changes depending on which shaft length you pick; only the mounting height and the control layout differ between the two.
Common questions
Does this have electric start? No, starting is manual only, by pull cord.
How long is Honda's coverage? 5 years from the factory.
Specifications
| Model | BF15D3SH |
| Model Year | 2017 |
| SKU | BF15D3SH-17 |
| Weight | 114.0000 |
| Manufacturer | Honda |
| Country of Manufacture | Japan |
| Horsepower | 15hp |
| Shaft Length | 15″ (Short) |
| Steering | Tiller |
| Starting | Manual |
| Trim & Tilt | Manual |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 2 |
| Displacement | 350 cc (21.4 cubic inches) |
| Bore and Stroke | 59 mm x 64 mm (2.3 x 2.5 inches) |
| Full Throttle RPM Range | 4,500-5,500 RPM |
| Ignition System | PGM-IG |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (86 octane) |
| Fuel Tank / Fuel Line | 3.2 Gal. Fuel Tank + Quick Connect Fuel Line |
| Oil Type | FC-W 10W-30 |
| Oil Capacity | Please inquire. |
| Lubrication | Wet Sump |
| Alternator | 6-Amp (76 watt) |
| Cooling System | Water Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.08:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Propeller | 9¼ x 10 in 4-Blade Aluminum |
| Internal Battery | NO |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns