In Stock & Ready to Freight Outboard Motors

Yamaha 300HP LF300XA

Part no: LF300XA
Brand: Yamaha
Condition: New
€33,767.42
Freight included, insured road freight within the UK & Europe (rates)
€33,767.42 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The Yamaha LF300XA is a 300 hp, six-cylinder four-stroke built with a counter-rotation lower unit. Shaft length is 25 inches, steering is remote mechanical, starting is electric, and the package weighs 551 pounds with 4169cc of displacement, meant for twin-engine rigging rather than a single-motor boat.

Why counter-rotation matters

Pairing a standard-rotation motor with a counter-rotation one on a twin-engine boat cancels out the steering pull each propeller would otherwise create on its own, letting the boat track straight without constant wheel correction. If you're running a single engine, this lower unit isn't what you want.

Fitment

Match the 25-inch shaft to your transom, and confirm remote mechanical steering hardware is in place. Standard equipment includes power trim and tilt, mechanical throttle and shift, and the owner's manual; a propeller is not included.

Mounting as a pair

When rigging two engines side by side, double-check the bracket spacing and transom centerline measurements called for in a twin-engine layout before drilling anything, since getting that wrong is far more costly to correct on two motors than one.

Engine

Six cylinders, 4169cc, electronic fuel injection, sold new.

Common questions

Is this for a single engine or a pair? Built for twin-engine use thanks to the counter-rotation lower unit.

Is a propeller included? No, that is a separate purchase from this motor.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns