In Stock & Ready to Freight Outboard Motors

Yamaha 25HP High Thrust | T25XWTC

Part no: #T25XWTC
Brand: Yamaha
Condition: New
€6,813.10
Freight included, insured road freight within the UK & Europe (rates)
€6,813.10 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This Yamaha T25XWTC is the High Thrust configuration of the 432cc, 25 hp four-stroke. Steering is remote mechanical, the starter is electric with a manual pull-cord backup, the shaft measures 25 inches, and total weight comes in at 154 pounds.

What's in the box

Standard equipment on this unit covers an aluminum dual-thrust propeller, the high-thrust lower unit itself, power tilt and trim, electric start hardware, a fuel line, a safety lanyard, and the owner's manual.

Pull-starting made easier

The backup starter is built with an automatic decompression device, which lowers the effort needed to pull-start the engine by hand, useful if the battery is ever disconnected or simply runs down over a storage season. You still get full electric convenience day to day.

Steering and control

Control runs through remote mechanical steering, so this is meant for a console-rigged boat rather than a tiller-steered one; confirm that wiring and cabling are already in place before ordering.

Using the safety lanyard

Clip the included lanyard to yourself, not just to a seat cushion, every time you're underway; it's there to cut the engine if you're thrown clear, and it only works if it's actually attached to the person driving.

Engine

Two cylinders, 432cc, EFI.

Common questions

Does it include a propeller? Yes, an aluminum dual-thrust prop ships as standard equipment, and the unit is sold new.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns