In Stock
Inspected & Documented
Condition notes recorded before palletizing.
30-Day Startup Warranty
Covers block, heads and internal moving components.
In Stock & Ready to Freight
Auto Parts & Accessories
M&H Racemaster MHR94 Drag Slick Tire, 10.5/30.5-15W, Track/Competition Use Only
€470.07
+ freight from €89.00, insured road freight, priced by delivery region
(rates)
From €559.07 delivered
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
M&H's Racemaster MHR94 drag slick is sized 10.5/30.5-15W and built as a bias-ply tire in M&H's 704 rubber compound, marked DOT Certified: Track Use Only for competition at the strip rather than street driving.
What it is for
M&H builds this slick with a wide W-designation footprint for a large contact patch and extra sidewall flex, aimed at door slammers and dragsters that need maximum traction off the line. Listed dimensions:
- Section width: 14.5 in.
- Recommended rim width: 10 in.
- Overall diameter: 30.8 in., mounted on a 15-inch wheel
- Sidewall: blackwall
What to check before buying
Because this is marked for track use only, look up your class or track's own rules on maximum section and rim width before mounting it, and do not run it on the street. Confirm your car's wheel width and brake clearance can accommodate the 10.5/30.5-15W size before ordering.
Common questions
Is street use allowed on this tire? No, M&H marks it DOT Certified: Track Use Only.
What compound is it built in? M&H's 704 compound.
What wheel size does it mount on? A 15-inch wheel with a 10-inch recommended rim width.
Performance Installation & Verification Checklist
- Disconnect vehicle battery ground terminal before installing any electrical, sensor, or powertrain hardware.
- Inspect all vacuum lines, fuel lines, and wiring harness connectors for secure, leak-free engagement.
- Calibrate electronic sensors, boost control solenoids, and ECU maps according to manufacturer instructions.
- Perform initial datalogging check under light load before subjecting vehicle to wide-open throttle.
Full terms: 30-day warranty · returns
