In Stock & Ready to Freight Outboard Motors

Mercury 90HP EXLPT FourStroke Outboard w/ Command Thrust

Brand: Mercury
Condition: New
€10,172.51
Freight included, insured road freight within the UK & Europe (rates)
€10,172.51 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This new 90HP EXLPT FourStroke Outboard combines the Command Thrust gearcase with a 25 inch extra-long shaft, electric start, and remote mechanical steering.

Why this gearcase

Command Thrust targets heavier boats that need low-speed pushing power while keeping cruising speed intact; shaft length and steering carry over from the standard EXLPT setup.

Specs

Dry weight is 363 lbs on this 2.1 liter, EFI-fed engine, with full throttle between 5000 and 6000 rpm and power trim and tilt standard. A propeller is not included with the sale.

Who it suits

Pairing the longer shaft with Command Thrust fits taller-transom boats that also carry heavier loads or need extra push at idle, such as a loaded pontoon or a boat that regularly tows at low speed.

What's included

The owner's manual, a tool kit, and mounting hardware come with it, backed by Mercury Marine's 3-year warranty.

Common questions

Why pick Command Thrust over the standard gearcase? It is built to hold a heavier boat on plane at low trolling speed.

Is a propeller included? No, it is not part of this listing.

Is the shaft longer than the ELPT version? Yes, this EXLPT uses the 25 inch extra-long shaft rather than the shorter long-shaft option.

What rpm range does it run at full throttle? Between 5000 and 6000 rpm, same as the rest of this 90HP FourStroke line.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns