In Stock
Mercury 9.9MXLH FourStroke
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Fitted with a 25 inch extra-long shaft, this used Mercury 9.9MXLH FourStroke runs the standard 9.9 hp gearcase rather than the Command Thrust upgrade, with manual tiller starting.
Specifications worth knowing
Gearcase ratio is 2.08:1 on a carbureted fuel system, with full throttle reaching between 5000 and 6000 rpm. Trim positions are ratcheting, and the exhaust runs through the propeller for quieter operation.
What to check before buying
Confirm the 25 inch shaft suits your transom before ordering; steering is tiller only here, with no remote-control rigging offered. Ignition is CDI with electronic spark advance, cooling is water-cooled with a thermostat, and the engine carries its own low oil pressure and over-rev warning system.
Who it suits
Boats with a taller transom that need the extra-long shaft, such as some utility, jon, aluminum tiller, and sail boats, where the standard gearcase is enough power for the job at hand. It is a straightforward fit for owners who do not need remote throttle and shift.
Condition notes
Dry weight is 84 lbs. Being a used motor, have hours and running condition confirmed with us before ordering, since wear differs unit to unit.
Common questions
What fuel does it run on? 87 octane with up to 10 percent ethanol, per Mercury's guidance.
What oil is recommended? Mercury FourStroke 10W-30 for this engine.
Does it include a propeller? Yes, a propeller is included with this listing.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns