In Stock & Ready to Freight Outboard Motors

Mercury 60ELHPT Command Thrust FourStroke

Part no: 60ELHPT
Brand: Mercury
Condition: Used
€6,956.59
Freight included, insured road freight within the UK & Europe (rates)
€6,956.59 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This used Mercury 60ELHPT outboard pairs tiller steering with the Command Thrust gearcase, built around a larger propeller for pushing heavier loads at low speed rather than chasing top-end speed. Electric start and a 20-inch shaft round out this rigging.

Engine specs

This inline-4, single-overhead-cam engine carries a CID/CC displacement of 60.8/995. Mercury rates full throttle between 5500 and 6000 rpm, dry weight at 247 lbs, and the gearcase ratio at 2.33:1. An 18-amp, 226-watt alternator and a 20-degree shallow water trim range round out the package, along with an optional remote fuel tank connection.

Controls and running it

Starting is electric turn-key, throttle and shift controls are mechanical and sold separately, and electronic fuel injection handles fuel delivery. Mercury recommends 87-octane fuel with up to 10 percent ethanol and its own FourStroke 25W-40 oil. This is a pre-owned engine, so running hours differ unit to unit; let us know if you need that information before ordering. Mercury backs this family of engines with its standard 3-year warranty.

Does this come with a propeller? Confirm propeller inclusion with us before ordering, since sizing depends on your hull and load with the Command Thrust gearcase.

Can this run off a remote fuel tank instead of carrying its own? Yes, Mercury lists an optional remote fuel tank connection for this engine. Mercury outboards

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns