In Stock & Ready to Freight Outboard Motors

Mercury 50HP ELPT Four-stroke Outboard | Scratch & Dent Level 1 | 6049

Brand: Mercury
Condition: New
€9,327.24
Freight included, insured road freight within the UK & Europe (rates)
€9,327.24 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Mercury's 50HP ELPT four-stroke, listed here as unit 6049, is new equipment under a Scratch & Dent Level 1 cosmetic grade. Listed weight is 247 lbs, on the 20-inch long shaft.

Specification

Displacement is rated at 60.8, and EFI delivery carries the motor to 5000-6000 RPM wide open. Steering runs through a remote, console-mounted setup rather than a tiller arm, an electric starter handles starting duties rather than a recoil pull, and the running angle is powered rather than hand-adjusted.

Condition

Scratch & Dent Level 1 is a cosmetic grade only, and the condition listed is new, not used. The listing does not say where the blemish sits on unit 6049, so request photos if that detail matters before you buy, and note that cosmetic grading has no bearing on the drivetrain itself.

In the box

A quick-connect fuel line, mounting hardware, a tool kit, and an owner's manual are included; a propeller is sold separately, per the listing. Keep the packaging until you have confirmed everything arrived undamaged, since freight claims are easier to file with the original crate on hand, and a motor of this size typically ships LTL rather than by small parcel.

Common questions

Is this unit new or used? New, per the listing, with a cosmetic Scratch & Dent Level 1 grade.

What warranty applies? Mercury Marine lists 3 years on this unit.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns