In Stock & Ready to Freight Outboard Motors

Mercury 30HP ELHPT FourStroke Outboard

Brand: Mercury
Condition: New
€5,663.31
Freight included, insured road freight within the UK & Europe (rates)
€5,663.31 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The new Mercury 30HP ELHPT FourStroke swaps gas-assist trim for power trim and tilt on the same tiller-steered, 20-inch-shaft inline-3 used across this family, letting the operator adjust running angle from a switch rather than a manual lever. Electric start carries over from the rest of the line, as does the 172 lb dry weight figure.

Power trim over gas-assist

Pick this version over a gas-assist tiller model if you want to fine-tune angle on the water without reaching for a manual release; it draws slightly more current to do so. Displacement holds at 32.1 cubic inches, with a 5250-6250 rpm full-throttle range, and dry weight stays at 172 lbs regardless of trim type.

Included equipment

Alongside this motor, Mercury ships mounting hardware, a tool kit, the owner's manual, and the 6.6-gallon tank fitted for quick-connect fueling; a propeller is not included and should be matched separately.

Is this a tiller or console-steered motor? Tiller-steered, with power trim and tilt worked from the handle itself.

What warranty does it carry? The standard Mercury Marine 3-year term, with nothing extended noted on this listing.

Being new, it carries zero prior hours, with full factory coverage from the day it is commissioned. Run through the owner's manual before first use, since trim settings and break-in steps affect how the engine performs early on.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns