In Stock
Mercury 250XL Verado Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This used Mercury 250XL Verado is the heavier, higher-output version at this horsepower: a 600 lbs dry weight V-8 with a 115-amp alternator and electro-hydraulic power steering, on a 25-inch shaft.
What stands out on this Verado
Dry weight runs 600 lbs, alternator output is 115-amp (1449 watt) with idle charge, and the gearcase ratio is 1.85:1. Steering is electro-hydraulic power steering rather than a cable or optional-hydraulic setup.
Shared architecture
The block is a 279 CID, 4.6-liter, 64-degree V-8 with dual overhead cams and 32 valves, reaching full throttle at 5200-6000 RPM, with Digital Throttle and Shift compatibility (controls sold separately).
Condition and finish
This used motor is finished in Phantom Black, with electric starting and SmartStart protection. Maximum trim range is 20 degrees and maximum tilt range is 73 degrees.
Q: Does a propeller come with it? No; source one separately that matches your boat.
Q: Does a used motor like this still carry a warranty? Confirm current warranty status with us directly, since coverage on a used engine depends on its history.
Recommended oil capacity is 7.0 quarts, with a 5.44-inch gearcase. Because this is a used Verado rather than a new one, ask about service history and hours before you rely on the listed specification alone.
The higher alternator output and electro-hydraulic steering are the two details that most separate a Verado from a FourStroke at this horsepower.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns