Evinrude E40DPGL E-TEC Outboard Motor

This used Evinrude E40DPGL runs the same larger engine block as the heaviest motor in this lineup, but comes in ten pounds lighter at 240 lbs (109 kg). Steering is remote and starting is electric only, with power trim and tilt fitted on this lighter 40-class unit.

Engine specifics

Figure a 2.9:1 final gear, with the block measuring 92 mm (3.62 in) across the bore and 66 mm (2.60 in) on the stroke, for 864 cc of displacement. Throttle spans 5500 to 6000 RPM, and the alternator is rated 81 amps, 25 net.

What to confirm before buying

Because starting is electric only with no rope backup fitted, check your battery and wiring before ordering. Remote steering is standard, with a tiller conversion available, the shaft runs 20 in (508 mm), and the mounting bracket should be rated for this motor's weight class.

Ask whether the motor's serial number and any paperwork match what is listed, which matters more on a used outboard than a new one.

Ask whether the lower unit has been pressure tested recently, a quick check that rules out a slow seal leak before you take the motor out on the water.

Can I start it by rope if the battery is dead? No rope-start option is fitted on this unit.

Is this a new motor? No, the E40DPGL is used.