In Stock & Ready to Freight Outboard Motors

Evinrude E25DRGL E-TEC Outboard Motor

Part no: E25DRGL
Brand: Evinrude
Condition: Used
€2,639.78
Freight included, insured road freight within the UK & Europe (rates)
€2,639.78 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Finished in graphite and dated to 2017, this used Evinrude E25DRGL pairs tiller steering with a rope-pull start and manual tilt, a 25 HP two-cylinder E-TEC.

A simple, tiller-first rigging

Tiller steering, rope starting, and manual tilt add up to fewer parts between you and the water: no helm cables to route, no battery required to get the engine running, and no power-tilt motor to maintain. A kit for remote steering and one for electric start are both offered as conversions, should you decide later that you want either feature on this particular motor.

What to measure

Weight for this graphite unit comes to 154 lbs, mounted on a 20 in shaft; check that length against your transom before committing to an order.

A thermostat or water-pump housing that looks recently serviced is a good sign on a used motor this size.

Ask whether this motor came off a boat that is being parted out or sold whole, since that can affect what rigging hardware is included.

A used motor's fuel primer bulb should feel firm rather than cracked or soft; a bulb past its useful life is a cheap, simple thing to replace before you rely on it out on the water.

What finish is this motor? Graphite, dated to 2017, per this unit's own records.

Is this engine new? No, the E25DRGL is a used motor, so confirm its hours with us first.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns