In Stock
2020 Yamaha 6 HP F6SMHA Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The Yamaha F6SMHA is a 6 hp single-cylinder four-stroke on a 15-inch short shaft, lighter than its long-shaft F6LMHA counterpart at 59 lbs against 61. The F6SMHA shares the same 139cc overhead-valve block and manual starting found across the F6 line.
Who it suits
A 15-inch shaft fits a lower transom than the 20-inch version Yamaha builds on this same platform, so measure your boat's transom height before choosing between the F6SMHA and its long-shaft sibling. This size motor is aimed at small dinghies, inflatables and sailboats that need a light auxiliary rather than a primary motor, and the lighter 59 lb figure helps when stowing it below deck.
Before you order
Steering on the F6SMHA swings 90 degrees from center in either direction, tilt reaches 69 degrees, and a 6-amp alternator covers a small electronics load through the carbureted fuel system. Yamaha rates this engine 3-star under C.A.R.B. emissions standards, with an oil capacity of 0.6 liters per change.
Common questions
How is the F6SMHA started? By pull cord; it does not have a key starter.
What terms cover this unit? The F6SMHA carries 3 years for pleasure use, 3 for government, and 1 for commercial.
Can I move this between boats? Yes, its light weight and clamp mounting make it easy to transfer between hulls as needed.
Does the F6SMHA need a separate fuel tank? Confirm current fuel tank and hose inclusions with us before ordering.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns