In Stock
2020 Mercury 4 HP 4MLH Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The Mercury 4 HP 4MLH is the long-shaft version of Mercury's smallest portable outboard, built for small fishing boats and sailboat auxiliary use with a 20-inch leg instead of the short shaft on the 4MH. It is new, manual-start, tiller-steered, and weighs 58.0 lbs.
Longer shaft for a taller transom
Choose this 20-inch version over a shorter sibling in the same line when your boat's transom sits higher; the added weight comes from the longer leg rather than any change to the powerhead itself. A carry handle keeps it manageable to move despite the extra length.
Construction and running gear
A forward-mounted lever works the forward-neutral-reverse shift, driven by a 2.15:1 gearset and CDI ignition with spark advance. The lower unit protects itself against corrosion with sacrificial anodes, a corrosion-resistant water pump housing, and zinc coatings on the water passages, all inside marine-grade alloy castings.
Does it include a propeller? Yes, a 3-blade aluminum prop is fitted before it ships.
What's in the box besides the motor? A tool kit, the printed manual, and a bottle of Mercury 4-stroke oil for the first service.
As a new, model-year 2020 unit, it comes with Mercury Marine's 3-year warranty starting from commissioning. Since the extra shaft length is the only real difference from its short-shaft sibling, rigging and break-in steps are otherwise identical between the two.
Specifications
| MODEL | 4MLH |
|---|---|
| MODEL YEAR | 2020 |
| SKU | 4MLH-20 |
| WEIGHT | 58.0 lb |
| MANUFACTURER | Mercury |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 4hp |
| SHAFT LENGTH | 20″ (Long) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | Internal |
| CYLINDER(S) | 1 |
| DISPLACEMENT | 7.5/123 |
| BORE AND STROKE | 2.32 x 1.77 |
| FULL THROTTLE RPM RANGE | 4500-5500 |
| IGNITION SYSTEM | CDI |
| INDUCTION SCAVENGING | OHV |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | 87 Octane (up to 10% ethanol content) |
| FUEL TANK / FUEL LINE | 0.3 US Gallon (1.15 liter) |
| OIL TYPE | SAE 10W-30 (Mercury 4-Stroke Outboard Oil) |
| OIL CAPACITY | 15 fl. Oz. (450 ml) |
| LUBRICATION | Pressurized wet sump |
| ALTERNATOR | Optional 12V 50W 4A (installation required) |
| COOLING SYSTEM | Water-cooled w/thermostat |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.15:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (forward mounted shift lever) |
| PROPELLER | 7.7″ Diameter X 7.0″ Pitch 3-Blade Aluminum |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns