In Stock
2020 Mercury 4 HP 4MH Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Mercury's 4 HP 4MH outboard is a small, single-cylinder portable aimed at fishing boats, compact inflatables, and sailboat auxiliary duty, built on a short 15-inch shaft with manual start and tiller steering. It is new, weighs 55.0 lbs, and per its own spec sheet carries a model year of 2019.
Why it suits a small boat
With a built-in carry handle and a weight light enough for one person to lift on and off a transom without a hoist, this is an engine suited to short outings close to shore where its internal tank means there is nothing extra to mount.
Construction
Running gear starts with a 2.15:1 gearset and CDI ignition carrying spark advance, shifting forward-neutral-reverse through a lever mounted at the front of the leg. The water pump housing is stainless, with zinc-coated passages and sacrificial anodes protecting against saltwater corrosion inside marine-grade alloy castings.
Is a propeller included? Yes, a 3-blade aluminum propeller comes with it.
What warranty applies to this motor? Mercury Marine's 3-year warranty.
Confirm the model year with us before ordering, since the listing title and the spec sheet disagree on it; everything else about this short-shaft, manual-start 4 hp matches across both. Keep the internal tank topped off before longer outings, since there is no remote tank option built into this version.
Specifications
| MODEL | 4MH |
|---|---|
| MODEL YEAR | 2019 |
| SKU | 4MH-19 |
| WEIGHT | 55.0 lb |
| MANUFACTURER | Mercury |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 4hp |
| SHAFT LENGTH | 15″ (Short) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | Internal |
| CYLINDER(S) | 1 |
| DISPLACEMENT | 7.5/123 |
| BORE AND STROKE | 2.32 x 1.77 |
| FULL THROTTLE RPM RANGE | 4500-5500 |
| IGNITION SYSTEM | CDI |
| INDUCTION SCAVENGING | OHV |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | 87 Octane (up to 10% ethanol content) |
| FUEL TANK / FUEL LINE | 0.3 US Gallon (1.15 liter) |
| OIL TYPE | SAE 10W-30 (Mercury 4-Stroke Outboard Oil) |
| OIL CAPACITY | 15 fl. Oz. (450 ml) |
| LUBRICATION | Pressurized wet sump |
| ALTERNATOR | Optional 12V 50W 4A (installation required) |
| COOLING SYSTEM | Water-cooled w/thermostat |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.15:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (forward mounted shift lever) |
| PROPELLER | 7.7″ Diameter X 7.0″ Pitch 3-Blade Aluminum |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns