In Stock
2019 Yamaha 8 HP F8LMHB Outboard Motor
incl. 23% VAT (Poland) · change country
United Kingdom · Ireland · Germany · France · Netherlands · Belgium · Spain · Italy · Portugal · Austria · Czech Republic · Poland · Sweden · Denmark · Finland · Greece · Hungary · Romania · Slovakia · Switzerland · Norway
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Weighing 89 lbs, this 2019 Yamaha F8LMHB is an 8 hp two-cylinder four-stroke on a 20-inch shaft. The F8LMHB is controlled from a tiller handle and started by pulling a cord rather than turning a key.
Who it suits
Tiller steering puts the F8LMHB at the stern of the boat rather than behind a console, which suits small aluminum boats, jon boats and dinghies where the operator sits near the transom. A 20-inch shaft is the longer of the two lengths Yamaha offers on this 8 hp platform, and the twin-cylinder layout gives smoother idle than a comparable single.
Before you order
Before ordering the F8LMHB, measure your transom; it needs a 20-inch shaft to fit correctly, since Yamaha also builds a shorter-shaft version of this engine under a separate listing. Full throttle is rated from 5000 to 6000 rpm, and the F8LMHB is carbureted rather than fuel injected.
Common questions
Does the F8LMHB start with a key? No, starting is manual, by pull cord.
What coverage comes with it? Yamaha's 3-year warranty, standard on a new F8LMHB.
Will a tiller handle fit a boat built for console steering? Not without rework; the F8LMHB is set up for stern operation.
Is the F8LMHB fuel injected? No, it runs a carburetor rather than EFI.
Can the F8LMHB be mounted on a sailboat transom bracket? Many sailors run a two-cylinder 8 hp like this as an auxiliary.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Our 2-year warranty covers internal lubricated components, cylinder heads and engine block from delivery, in addition to your statutory rights.
Full terms: 2-year warranty · returns