In Stock & Ready to Freight Outboard Motors

2019 Yamaha 50 HP F50LB Outboard Motor

Brand: Yamaha
Condition: New
€3,480.68
Freight included, insured road freight within the UK & Europe (rates)
€3,480.68 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This 2019 Yamaha F50LB is a 50 hp four-stroke four-cylinder, running a 996cc block through electronic fuel injection. The F50LB hooks into a console's steering cable and throttle linkage rather than a tiller, starting on a key. It rides on a 20-inch shaft and weighs 247 lbs.

Who it suits

Boats already rigged with a cable-steered console and a battery at the stern are the natural fit for the F50LB, since it is set up to bolt into that kind of control run. It is sold new, not as a used or refurbished unit, and ships with Yamaha's standard coverage for a motor this size. A four-cylinder block at this displacement runs smoother at idle than a comparable twin.

Before you order

Check the distance from the top of your transom down to the keel to confirm a 20-inch shaft is correct for the F50LB, and make sure your existing steering cable and throttle linkage are compatible with Yamaha's remote mechanical hardware before this ships.

Specification notes

Full throttle operation on the F50LB is rated between 5000 and 6000 rpm, and Yamaha covers this new motor under a 3-year warranty.

Common questions

Can I run this with a tiller handle? No, the F50LB is configured for remote mechanical steering only.

Is starting manual or electric? Electric, so a battery and wiring at the stern are needed for the F50LB.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns