In Stock
2019 Yamaha 20 HP F20SWB Outboard Motor
incl. 21% VAT (Belgium) · change country
United Kingdom · Ireland · Germany · France · Netherlands · Belgium · Spain · Italy · Portugal · Austria · Czech Republic · Poland · Sweden · Denmark · Finland · Greece · Hungary · Romania · Slovakia · Switzerland · Norway
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
A shorter 15-inch shaft, remote mechanical steering, and a dual electric-and-manual starter mark the 2019 Yamaha F20SWB, rated 20 hp from two cylinders. New, it weighs 126 lbs, fuel-injected at 432cc, spinning 5000 to 6000 rpm wide open.
Before you order
Remote steering means this motor runs from a console through cables rather than a tiller handle at the transom, so confirm the boat's existing rigging matches before ordering. A shaft that is shorter than the transom calls for will leave the prop running too shallow, cutting both cooling and bite, so check the 15-inch shaft against the transom height separately.
Who it suits
Shorter-transom boats rigged for console control get the same electric-plus-backup setup here, so a weak battery does not strand the boat at the ramp.
Why keep the manual backup
A boat used only on weekends is exactly where a battery tends to go flat from disuse; having the pull cord as a fallback means that is an inconvenience rather than a wasted trip to the water. Keeping the cord accessible under the cowling means it is never more than a minute away.
Common questions
What is the shaft length? 15 inches. How does this start? By console-mounted electric switch, with a pull-cord backup. How much weight does it add on the transom? 126 lbs, and Yamaha backs it with a 3-year warranty.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Our 2-year warranty covers internal lubricated components, cylinder heads and engine block from delivery, in addition to your statutory rights.
Full terms: 2-year warranty · returns