In Stock
2019 Mercury 9.9 HP 9.9EH Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Portable enough to carry rather than just mount, this 2019 Mercury 9.9EH (SKU 9.9EH-19) runs 9.9 HP over two cylinders on the short shaft, electric-started and tiller-steered.
Where this size fits
Jon boats, skiffs, and small pontoons can run this short-shaft 9.9 as their main motor, while sailboats and trollers tend to use it as backup muscle alongside something bigger for open water. The multi-function tiller brings throttle, shifting, and steering together, and Mercury's auto-ratchet hardware handles tilt by hand without extra tools.
Engine and electrical
A manual pull-start backs up the electric starter here, should the 6-amp alternator ever fall short. Gearcase ratio is 2.08:1. Saltwater duty is covered under Mercury's rating, with the standard three-year term protecting the purchase. Wheel it rather than carry it: a dolly kit saves the back when moving a motor this size around a dock.
Q: Is this the short or long shaft version? Short.
Q: Does the tiller control the throttle too? Yes, throttle, shifting, and steering all run through the one tiller handle.
Q: Is tilt powered on this motor? No, Mercury's auto-ratchet hardware adjusts it by hand at the tiller.
Q: Does it carry a saltwater rating? Yes, Mercury rates this particular motor for saltwater running, right out of the box.
Browse other Mercury outboards near this horsepower.
Specifications
| MODEL | 9.9EH |
| MODEL YEAR | 2019 |
| SKU | 9.9EH-19 |
| WEIGHT | 91.0 lb |
| MANUFACTURER | Mercury |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 9.9hp |
| SHAFT LENGTH | 15″ (Short) |
| STEERING | Tiller |
| STARTING | Electric |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 208 cc (12.8 cubic inches) |
| BORE AND STROKE | 55 x 44 mm (2.16 x 1.73 inches) |
| FULL THROTTLE RPM RANGE | 5000-6000 |
| IGNITION SYSTEM | Digital CD Ignition w/Electronic Spark Advance |
| INDUCTION SCAVENGING | SOHC |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | 87 Octane (up to 10% ethanol content) |
| FUEL TANK / FUEL LINE | 3.2 Gal. Fuel Tank + Quick Connect Fuel Line |
| OIL TYPE | SAE 10W-30 (Mercury 4-Stroke Outboard Oil) |
| OIL CAPACITY | 27 fl. Oz. (800 ml) |
| LUBRICATION | Trochoid Pump |
| ALTERNATOR | 12V 76W 6A (standard on electric start models) |
| COOLING SYSTEM | Water-Cooled, Thermostatically Controlled |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.08:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (shift in tiller handle) |
| PROPELLER | 8.5″ Diameter X 9.0″ Pitch 3-Blade Aluminum |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns