In Stock & Ready to Freight Outboard Motors

2019 Mercury 5 HP 5MXLH Outboard Motor

Brand: Mercury
Condition: New
€892.99
+ freight from €89.00, insured road freight, priced by delivery region (rates)
From €981.99 delivered
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

With a 25-inch extra-long shaft, the 2019 Mercury 5 HP 5MXLH Outboard Motor is built to reach deep enough on a larger fishing or drift boat to work as a trolling or kicker motor, or as auxiliary power on a sailboat with a tall transom.

Why the extra-long shaft

This is the longest shaft Mercury offers in its 5 horsepower line, meant for boats where a shorter shaft would leave the propeller running too shallow to bite properly. The single cylinder here is set at 123 cc, or 7.5 cubic inches by Mercury's other measure, through a 59 by 45 millimeter bore and stroke, carbureted and fired by digital CD ignition, with a rev ceiling of 4500 to 5500 rpm, turning a propeller sized at 7.7 inches across with an 8.0-inch pitch, three aluminum blades rather than the high-thrust unit fitted to the 5MLHA. Lubrication runs through a trochoid pump, and an optional 12-volt, 50-watt alternator can be installed if charging capability is wanted.

Setup and weight

External fuel tank connection is standard here, so an optional external tank and line can be added for longer trips beyond the internal tank's range. Saltwater-rated construction, a 2.15:1 gear ratio, and forward-neutral-reverse shift round out the motor. Dry weight is 59 pounds, and it carries Mercury Marine's three-year warranty.

Specifications

MODEL 5MXLH
MODEL YEAR 2019
SKU 5MXLH-19
WEIGHT 59.0 lb
MANUFACTURER Mercury
COUNTRY OF MANUFACTURE Japan
HORSEPOWER 5hp
SHAFT LENGTH 25″ (Extra Long)
STEERING Tiller
STARTING Manual
TRIM & TILT Manual
FUEL DELIVERY Carburetor
FUEL TANK Internal
CYLINDER(S) 1
DISPLACEMENT 123 cc (7.5 cubic inches)
BORE AND STROKE 59 x 45 mm (2.32 x 1.77 inches)
FULL THROTTLE RPM RANGE 4500-5500
IGNITION SYSTEM Digital CD Ignition w/Electronic Spark Advance
INDUCTION SCAVENGING OHV
VALVES PER CYLINDER 2
FUEL TYPE 87 Octane (up to 10% ethanol content)
FUEL TANK / FUEL LINE 0.3 US Gallon (1.15 liter)
OIL TYPE SAE 10W-30 (Mercury 4-Stroke Outboard Oil)
OIL CAPACITY 15 fl. Oz. (450 ml)
LUBRICATION Trochoid Pump
ALTERNATOR Optional 12V 50W 4A (installation required)
COOLING SYSTEM Water-Cooled, Thermostatically Controlled
SALTWATER RATED Yes
GEAR RATIO 2.15:1
GEAR SHIFT Forward-Neutral-Reverse (forward mounted shift lever)
PROPELLER 7.7″ Diameter X 8.0″ Pitch 3-Blade Aluminum

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns