In Stock & Ready to Freight Outboard Motors

2019 Mercury 15 HP EFI 15ELH Outboard Motor

Brand: Mercury
Condition: New
€1,748.57
Freight included, insured road freight within the UK & Europe (rates)
€1,748.57 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Mercury gave the 2019 15ELH EFI an ambidextrous tiller handle, letting the throttle grip work comfortably from either side rather than favoring one hand, something it calls a first for a portable outboard. At 114 lb, with a 20-inch shaft and electronic fuel injection, it is the long-shaft counterpart to the 15EH EFI in this range, aimed at boats that ride a little taller in the water.

Engine details

Displacement comes in at 333cc, equal to 20.3 cubic inches, through a 61 by 57 mm bore and stroke. Fuel injection in place of a carburetor should mean steadier starts and idle than the carbureted long-shaft models Mercury also sells, and full throttle reaches 5000 to 6000 RPM. Electric start handles everyday starting duty on this model.

Fit and coverage

A 2.15:1 gearcase and a 138-watt alternator round out the drivetrain and electrical side on this unit. Mercury Marine's warranty here runs five years, matching the term on its EFI short-shaft sibling, and the external fuel tank system carries over from the rest of this EFI range.

What does the ambidextrous tiller change? The throttle grip is built to work comfortably from either side of the handle.

Is this carbureted or EFI? Electronic fuel injection.

Does the shaft length differ from the short-shaft EFI model? Yes, this one uses a 20-inch shaft rather than the shorter option.

Specifications

MODEL 1A15311BK
MODEL YEAR 2019
SKU 15ELH-19EFI
WEIGHT 114.0 lb
MANUFACTURER Mercury
COUNTRY OF MANUFACTURE Japan
HORSEPOWER 15hp
SHAFT LENGTH 20″ (Long)
STEERING Tiller
STARTING Electric
TRIM & TILT Manual
FUEL DELIVERY EFI
FUEL TANK External
CYLINDER(S) 2
DISPLACEMENT 333 cc (20.3 cubic inches)
BORE AND STROKE 61 mm x 57 mm (2.402 in. x 2.244 in.)
FULL THROTTLE RPM RANGE 5000-6000
IGNITION SYSTEM Digital CD Ignition w/Electronic Spark Advance
INDUCTION SCAVENGING SOHC
VALVES PER CYLINDER 2
FUEL TYPE 87 Octane (up to 10% ethanol content)
FUEL TANK / FUEL LINE 6.6 Gal. Fuel Tank + Quick Connect Fuel Line
OIL TYPE SAE 10W-30 (Mercury 4-Stroke Outboard Oil)
OIL CAPACITY 1 Quart (1000 ml)
LUBRICATION Trochoid Pump
ALTERNATOR 12V 138W 12A (standard on electric start models)
COOLING SYSTEM Water-Cooled, Thermostatically Controlled
SALTWATER RATED Yes
GEAR RATIO 2.15:1
GEAR SHIFT Forward-Neutral-Reverse (shift in tiller handle)
PROPELLER 9.2″ Diameter X 9.1″ Pitch 3-Blade Aluminum

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns