In Stock
2019 Mercury 15 HP EFI 15EH Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
At 111 lb, the 2019 Mercury 15EH EFI undercuts the carbureted 15EH models in this lineup on weight while keeping the same 15-inch short shaft and tiller setup. Electronic fuel injection in place of a carburetor is the headline change on this model, aimed at owners who want easier cold starts without fiddling with a choke.
Engine details
Displacement works out to 333cc, or 20.3 cubic inches, smaller than the carbureted 15EH's powerhead, with a 61 by 57 mm bore and stroke. Full throttle falls in the 5000 to 6000 RPM range, and the same 6.6-gallon portable tank used elsewhere in this lineup supplies fuel, connected by a quick-connect fitting instead of a built-in reservoir.
Power and coverage
A 138-watt alternator supports the electric start and a 2.15:1 gearcase turns the propeller, with oil changes calling for roughly 1000 ml. Mercury's warranty on this engine runs five years; if you need the exact displacement confirmed for your specific unit, check with us before ordering.
Is this carbureted or fuel injected? Electronic fuel injection, which sets this EH variant apart from the carbureted version in the same lineup.
What's the dry weight? 111 lb, lighter than the carbureted 15EH.
Is steering handled by a tiller? Yes, this model keeps the tiller handle rather than remote controls, with the shift lever built into the grip.
Specifications
| MODEL | 1A15301BK |
| MODEL YEAR | 2019 |
| SKU | 15EH-19EFI |
| WEIGHT | 111.0 lb |
| MANUFACTURER | Mercury |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 15hp |
| SHAFT LENGTH | 15″ (Short) |
| STEERING | Tiller |
| STARTING | Electric |
| TRIM & TILT | Manual |
| FUEL DELIVERY | EFI |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 333 cc (20.3 cubic inches) |
| BORE AND STROKE | 61 mm x 57 mm (2.402 in. x 2.244 in.) |
| FULL THROTTLE RPM RANGE | 5000-6000 |
| IGNITION SYSTEM | Digital CD Ignition w/Electronic Spark Advance |
| INDUCTION SCAVENGING | SOHC |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | 87 Octane (up to 10% ethanol content) |
| FUEL TANK / FUEL LINE | 6.6 Gal. Fuel Tank + Quick Connect Fuel Line |
| OIL TYPE | SAE 10W-30 (Mercury 4-Stroke Outboard Oil) |
| OIL CAPACITY | 1 Quart (1000 ml) |
| LUBRICATION | Trochoid Pump |
| ALTERNATOR | 12V 138W 12A (standard on electric start models) |
| COOLING SYSTEM | Water-Cooled, Thermostatically Controlled |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.15:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (shift in tiller handle) |
| PROPELLER | 9.2″ Diameter X 9.8″ Pitch 3-Blade Aluminum |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns